You might have bought replacement windows and doors Milton, and upon contacting an installer, you find that they charge too much for the installation fee. This should not worry you because you can install the windows by yourself if you have the skills and tools necessary to carry out the work. That is all it takes to accomplish doors and windows replacement successfully.
However, installing windows and doors by yourself should not be the first choice, especially if it is a huge project or you do not have the right skills and tools. Wrongly installed windows and doors Milton will not perform well. This project will take a lot of your time, and it is a lot of work, so you should compare what you are saving and the amount of work you are about to do.
1. Types Of Replacement Windows
There are two types of replacement windows. They include the following:
2. New Construction Windows
These are complete windows replacement Milton that comes with everything, including the frame and nailing flanges. New construction windows can be nailed flat to the outside part of the house. The window is installed from the outside to fit in the space.
These windows are used by homeowners who are rebuilding their windows again. Before buying a new construction window for replacement, you should consult with the contractor and the window manufacturer for them to detach the nailing flange.
3. Replacement Windows
These are the most commonly used windows for replacement. They come with the window unit containing sashes. You will buy replacement windows if your frame is in good condition because they should fit your existing frame.
These windows do not have nailing fins, so they will fit directly into the frame. It is not advisable to use replacement windows if you are rebuilding the wall.
4. Installing Replacement Windows
Since you are installing windows replacement Milton units on the existing frame, there is no need to replace the exterior trim. Trims are delicate, and removing them might cause damages unless you want to install a new one.
This is different with new construction windows because you remove everything, including the trim. You have to buy a new trim and replace it all around the new window. You also need to install new flashing on the top and bottom of the window and caulking to add energy efficiency.
Replacement windows sound easier to install, but they are also delicate to work with. Things like trim, sill, and drywall are delicate to handle, and if not removed with care, they can get destroyed in the process.
You also need some carpentry skills for new construction windows and doors Milton, because you might need to rebuild some parts. If you are good at carpentry, installing new construction windows will not be a challenge for you.
5. How Long Will It Take
The amount of time you will spend installing the windows should also influence your decision. Be ready to spend about four to six hours replacing one window.
Some additional processes like changing the side on which the window opens or changing the exterior trim will have you spending a whole day replacing one window. The total number of days you will take will depend on how many windows you are replacing.
This process might take longer if you put in new caulk and paint because you have to wait for the first layer to dry. A new construction window could take less time if your space is fully prepared. However, it could take you one day if you are doing a wall rebuilding.
6. Check If You Can Work With Replacements
Before buying your replacement window, you must take measurements of the existing frame first. This will ensure you buy the correct window size. You should also check your frame and ensure it is in good condition.
If the frame has cracks, use wood putty to fill them and ensure it is not rotten. You should research different replacement windows and doors Milton to get the best for your house. In addition, if your frame has a sloping sill, you can buy a sill adapter from the window manufacturer.